Looking at the impact of AI server development on the PCB industry, mainstream AI servers, compared to general servers, incorporate 4 to 8 GPUs. Due to the need for high-frequency and high-speed data transmission, the number of PCB layers increases, and there’s an upgrade in the adoption of CCL grade as well. This surge in GPU integration drives the AI server PCB output value to surpass that of general servers by several times. However, this advancement also brings about higher technological barriers, presenting an opportunity for high-tech PCB manufacturers to benefit.

TrendForce’s perspective: 

• The increased value of AI server PCBs primarily comes from GPU boards.

Taking the NVIDIA DGX A100 as an example, its PCB can be divided into CPU boards, GPU boards, and accessory boards. The overall value of the PCB is about 5 to 6 times higher than that of a general server, with approximately 94% of the incremental value attributed to the GPU boards. This is mainly due to the fact that general servers typically do not include GPUs, while the NVIDIA DGX A100 is equipped with 8 GPUs.

Further analysis reveals that CPU boards, which consist of CPU boards, CPU mainboards, and functional accessory boards, make up about 20% of the overall AI server PCB value. On the other hand, GPU boards, including GPU boards, NV Switch, OAM (OCP Accelerator Module), and UBB (Unit Baseboard), account for around 79% of the total AI server PCB value. Accessory boards, composed of components such as power supplies, HDD, and cooling systems, contribute to only about 1% of the overall AI server PCB value.

• The technological barriers of AI servers are rising, leading to a decrease in the number of suppliers.

Since AI servers require multiple card interconnections with more extensive and denser wiring compared to general servers, and AI GPUs have more pins and an increased number of memory chips, GPU board assemblies may reach 20 layers or more. With the increase in the number of layers, the yield rate decreases.

Additionally, due to the demand for high-frequency and high-speed transmission, CCL materials have evolved from Low Loss grade to Ultra Low Loss grade. As the technological barriers rise, the number of manufacturers capable of entering the AI server supply chain also decreases.

Currently, the suppliers for CPU boards in AI servers include Ibiden, AT&S, Shinko, and Unimicron, while the mainboard PCB suppliers consist of GCE and Tripod. For GPU boards, Ibiden serves as the supplier, and for OAM PCBs, Unimicron and Zhending are the suppliers, with GCE, ACCL, and Tripod currently undergoing certification. The CCL suppliers include EMC. For UBB PCBs, the suppliers are GCE, WUS, and ACCL, with TUC and Panasonic being the CCL suppliers.

Regarding ABF boards, Taiwanese manufacturers have not yet obtained orders for NVIDIA AI GPUs. The main reason for this is the limited production volume of NVIDIA AI GPUs, with an estimated output of only about 1.5 million units in 2023. Additionally, Ibiden’s yield rate for ABF boards with 16 layers or more is approximately 10% to 20% higher than that of Taiwanese manufacturers. However, with TSMC’s continuous expansion of CoWoS capacity, it is expected that the production volume of NVIDIA AI GPUs will reach over 2.7 million units in 2024, and Taiwanese ABF board manufacturers are likely to gain a low single-digit percentage market share.

(Photo credit: Google)