Source to TrendForce, the most recent update on solar materials pricing indicates an ongoing decline in Polysilicon and Module prices, while Wafer and Cell prices are holding steady for the time being.

• Polysilicon

Polysilicon prices continue to decline throughout the week. The mainstream concluded price for mono recharge polysilicon is RMB 64/KG, while mono dense polysilicon is priced at RMB 62/KG and N-type polysilicon is currently priced at RMB 66/KG.

Looking at the market transaction dynamics, there’s not a significant volume of orders being placed. Some companies are gearing up for December’s order negotiations. Observing the price trend, polysilicon manufacturers are adjusting prices for both new and existing orders. Even some previously high-priced orders have experienced declines.

Furthermore, the average price of N-type polysilicon in new orders is generally below the 70000 yuan/ton mark. On the supply side, numerous projects are now in production, leading to a constant increase in the marginal increment of polysilicon and further swelling polysilicon inventory. Consequently, polysilicon manufacturers are grappling with increased pressure to de-stock.

Despite a month-on-month rise in operation rates for professional wafer manufacturers, creating additional demand for polysilicon, the surplus supply remains challenging to address.

This week, polysilicon prices continue their downward trajectory, and there’s a significant oversupply of polysilicon. Moreover, with customer installation demand still not turning positive, crystal pulling manufacturers are adopting a pessimistic stance toward future polysilicon prices, displaying a cautious approach to purchasing polysilicon.

On the flip side, polysilicon manufacturers are determined to maintain current prices and show no signs of reducing prices to clear inventory. In conclusion, a tug-of-war in pricing dynamics is evident between buyers and sellers.

• Wafer

The prices of wafer have maintained stable throughout the week. The mainstream concluded price for M10 P-type wafer is RMB 2.30/Pc, while G12 P-type wafer is priced at RMB 3.30/Pc and M10 N-type is priced at RMB2.40/Pc.

On the supply side, wafer inventory has returned to the reasonable range, sitting at approximately 1.3-1.5 billion pieces. Analyzing various wafer types, the inventory of 210mm P-type wafers has seen a notable decrease, with the consumption rate slowing due to weakened demand.

With the alleviation of inventory pressure, specialized wafer manufacturers are ramping up their operational rates, resulting in a slight month-on-month increase in wafer output. Turning to the demand side, cell manufacturers are indicating a reduction in the production of 182mm P-type cells, while there’s no change in output for other cell types.

Consequently, the purchasing demand for 182mm P-type wafers is expected to decrease. Although wafer prices are holding steady this week, considering the divergent operational rates among downstream cell manufacturers, a future divergence in prices between N-type and P-type wafers is anticipated.

Moreover, attention should be directed towards whether the demand and supply relationship can sustain stable prices after the higher wafer activation rates lead to an increase in wafer output during the same period.

• Cell

Cell prices have maintained stable this week. The mainstream concluded price for M10 cell is RMB 0.46/W, while G12 cell is priced at RMB 0.56/W. The price of M10 mono TOPCon cell is RMB 0.49/W.

On the supply side, cell inventory can currently sustain for about six to seven days, but the pressure on inventory is mounting as downstream demand gradually declines. We’re currently in the midst of the technology iteration phase for N-type and P-type cells.

The production capacity of 182mm P-type cells has significantly dropped, leading to a decline in its OEM fees to 1.0-1.2 yuan. Given the current cell price and the manufacturing cost, the production line for 182mm P-type cells is operating at a loss, while the 210mm P-type cells are still profitable, thanks to orders this month.

However, as order deliveries conclude, the tense supply and demand dynamics are expected to ease. On the demand side, downstream module prices continue to slide, prompting module manufacturers to push for a reduction in cell prices. Additionally, customer demand is sluggish, and buyers are adopting a more cautious approach to future purchases.

This week, cell prices remain relatively stable, but production of 182mm P-type cells has been significantly reduced due to sustained losses, leading to a simultaneous decline in demand and supply. Nevertheless, there is still support from order deliveries for 210mm P-type cells.

In conclusion, with module prices consistently decreasing, we anticipate that cell prices will face increasing pressure in the coming weeks.

• Module

Module prices have gone down throughout the week. The mainstream concluded price for 182mm facial mono PERC module is RMB 1.03/W, 210mm facial mono PERC module is priced at RMB 1.04/W, 182mm bifacial glass PERC module at RMB 1.04/W, and 210mm bifacial glass PERC module at RMB 1.05/W.

On the supply side, prices quoted by leading manufacturers to their dealers have plummeted to less than 1 yuan/W, and bidding prices for recent projects are hitting unprecedented lows. The competition among module manufacturers has reached a fever pitch, driving prices in the sector to their rock bottom.

As the N-type and P-type technology undergo iteration, production capacity is slated to be officially cleared at its current low price. Shifting to the demand side, October saw a month-on-month decrease in new PV installations, indicating a clear decline in installation demand, according to statistics from the NEA.

Although distributed PV installed capacity remains robust, it cannot sustain a significant increase, and centralized ground installations are entering their off-season. Additionally, there’s no indication of a rebound in overseas demand, making it challenging for customer demand for module purchases to turn positive.

As the year draws to a close and earinings reports will be reported, manufacturers are grappling with the pressure to meet annual goals, intensifying the need to clear inventory. However, they find themselves in a precarious position in negotiations with customers, compelling them to further reduce prices to facilitate more shipments.

In summary, module prices are experiencing a decline this week and are anticipated to further decrease in the near future.

Source to TrendForce, the latest solar materials price revealed that Polysilicon prices are declining due to decreased orders and increased supply; Wafer prices remain stable but face potential pressure.

• Polysilicon

Polysilicon prices continue to decline throughout the week. The mainstream concluded price for mono recharge polysilicon is RMB 65/KG, while mono dense polysilicon is priced at RMB 63/KG, and N-type polysilicon is currently priced at RMB 68/KG.

Looking at the market transaction dynamics, orders took a hit this week, and collectively signing orders within a centralized period has ceased. Observing the price trends, major manufacturers are experiencing a decline in new orders, causing a further narrowing of the transaction prices for both N-type and P-type polysilicon.

Looking at the supply side, the new production capacity of leading polysilicon manufacturers is set to come online this month, contributing to an uptick in output. Consequently, the polysilicon supply will continue to outpace demand, leading to a further increase in polysilicon inventory, which has now reached the range of 90,000 to 120,000 tons this week. Shifting the focus to the downstream industrial chain, the wafer inventory has reverted to a reasonable level, and there’s a slight uptick in the activation rate of crystal-pulling manufacturers.

This has resulted in an increased demand for polysilicon. However, this heightened demand is insufficient to counterbalance the marginal increase in polysilicon supply. In summary, the price of polysilicon is on a downward trajectory, and with new production capacities slated to come online by year-end, the short-term supply-demand imbalance is unlikely to be rectified.

Compounding this, the absence of concrete demand from customers indicates an anticipated further dip in polysilicon prices. The inventory of N-type polysilicon is expanding, intensifying pressure on upstream raw materials. Consequently, the support for N-type polysilicon prices is diminishing, and the price gap between N-type and P-type polysilicon is expected to shrink.

• Wafer

The prices of wafers have remained stable throughout the week. The mainstream concluded price for the M10 P-type wafer is RMB 2.30/Pc, while the G12 P-type wafer is priced at RMB 3.30/Pc and the M10 N-type is priced at RMB2.40/Pc.

On the supply side, there are indications that specialized polysilicon manufacturers may ramp up their operating rates, primarily due to a reduction in wafer inventory. The current inventory of wafers has dwindled to the range of 1.4-1.6 billion pieces, bringing substantial relief to wafer manufacturers from inventory pressures. Switching to the demand side, the pressure on cell demand persists, with cell inventory remaining unconsumed.

Consequently, some cell manufacturers are contemplating production cuts to mitigate potential future losses. This slowdown in demand from cell manufacturers is causing a sluggishness in the demand for wafers. Currently, both wafer and cell prices are hovering close to their production costs, empowering manufacturers on both fronts to engage in assertive bargaining. As a result, it is anticipated that price negotiations will reach a stalemate in the short term.

In summary, wafer prices have held steady this week, but it’s crucial to remain vigilant as wafer prices might face renewed pressure. This could be triggered by a decline in upstream raw material prices and the persistent lack of positive momentum in downstream demand.

• Cell

Cell prices have been different with the G12 cell price rebounding and other types remaining stable this week. The mainstream concluded price for the M10 cell is RMB 0.46/W, while the G12 cell is priced at RMB 0.56/W. The price of the M10 mono TOPCon cell is RMB 0.49/W.

On the supply side, the overall cell inventory is proving challenging to deplete due to the persistently sluggish downstream demand. This situation is exerting increased pressure on cell inventory levels. Additionally, faced with the challenge of low cell prices, a portion of the high-cost P-type cell production capacity has been gradually scaled back. If prices continue to decline in the future, this segment of production capacity may eventually phase out.

This underscores the evolving landscape of P-type and N-type cell technologies, prompting cell manufacturers to reassess how they manage the older production capacity of P-type cells. Shifting to the demand side, module inventory remains elevated, yet overseas customer demand remains weak even during the peak season. In summary, cell prices have remained stable this week. With the support from the delivery of orders this month, there is intense demand for 210mm P-type cells, leading to a rebound in their prices.

• Module

Module prices have gone down slightly throughout the week. The mainstream concluded price for 182mm facial mono PERC module is RMB 1.06/W, 210mm facial mono PERC module is priced at RMB 1.08/W, 182mm bifacial glass PERC module at RMB 1.07/W, and 210mm bifacial glass PERC module at RMB 1.09/W.

On the supply side, there’s a divergence in production schedules among module manufacturers. First-tier manufacturers are maintaining stable delivery schedules with sufficient orders, while second and third-tier manufacturers are compelled to scale back production to avert losses. Additionally, it’s crucial to monitor the impact of backhaul orders’ sale prices on domestic module prices. Turning to the demand side, overseas module inventory remains elevated, coupled with sluggish purchasing demand.

The customer demand for modules is heading into the off-season. Furthermore, the demand for distributed PV installations is struggling to turn positive due to overall weak demand. Faced with weak downstream demand, module manufacturers are adopting a strategy of lowering prices to facilitate more shipments, driven by the imperative to clear inventory by year-end. In summary, module prices are anticipated to experience a slight decline this week.

Read more:

• PV Industry Supply Chain Price Update
• PV Materials Price in Early November

In TrendForce’s latest solar energy pricing, it is revealed that upstream polysilicon and wafer transactions have reached a standstill, while downstream cell and module prices continue to decline.

• Polysilicon

Polysilicon prices continue to decline throughout the week. The mainstream concluded price for mono recharge polysilicon is RMB 70/KG, while mono dense polysilicon is priced at RMB 68/KG and N-type polysilicon is currently priced at RMB 75/KG.

In terms of trading, this week has shown a slight improvement compared to the stagnation of the previous week. Some small orders have been placed, but the majority of companies are still in the negotiation process. Additionally, there are ongoing discussions about transaction prices for polysilicon and crystal pulling.

Examining the price trends, there’s a notable divergence between leading manufacturers and second-tier manufacturers, with the current prices approaching the cost threshold for the latter and older capacity.

When we analyze the supply and demand dynamics, it becomes evident that as polysilicon prices continue to decline, downstream manufacturers are considering production cuts, and new production capacity might face the challenge of running at a loss right after starting operations.

Moreover, considering the projected oversupply in the future and the potential for prices to hit rock bottom, some manufacturers have realized that the profits from new production capacity may differ significantly from their expectations, prompting them to adjust their production schedules.

However, in the short term, polysilicon output is showing a month-on-month growth trend this quarter. As downstream demand decreases, polysilicon prices will likely continue to face pressure. Overall, this week has seen a decline in quoted polysilicon prices, and the price gap between N-type and P-type polysilicon continues to narrow.

• Wafer

The prices of wafer have still reduced throughout the week. The mainstream concluded price for M10 wafer is RMB 2.30/Pc, while G12 wafer is priced at RMB 3.30/Pc. The current cell prices are causing significant losses in the cell business, leading to a substantial reduction in activation rates.

The overall market turnover is currently sluggish. Additionally, the quoted prices only reflect the trend of declining wafer prices and may not accurately represent the actual transaction prices for spot goods.

On the supply side, wafer prices have continued to decline over the past two weeks. If the prices of different types of wafers keep dropping, manufacturers may find themselves in a situation where their costs exceed their selling prices.

Consequently, wafer production schedules have seen a significant reduction, forcing some second and third-tier manufacturers to maintain OEM business for meager profits. The current wafer inventory level has decreased to 1.9-2.1 billion pieces, and there are indications that prices are reaching a bottom in the market.

On the demand side, downstream cell manufacturers are gradually reducing their production schedules, and inventory issues have not been effectively resolved. As a result, cell manufacturers are becoming more cautious when it comes to purchasing wafers. This week, wafer prices have continued to decline, but the rate of decline will narrow with cost support.

However, considering the price pressure imposed by downstream consumers, their high inventory levels, and other factors, wafer prices have yet to stabilize and are likely to continue falling in the future.

• Cell

Cell prices have still declined this week. The mainstream concluded price for M10 cell is RMB 0.48/W, while G12 cell is priced at RMB 0.52/W. The price of M10 mono TOPCon cell is RMB 0.49/W.

On the supply side, current cell inventory has remained high for more than seven days. Consequently, facing pressure from both the elevated inventory levels and downstream module manufacturers, cell prices have experienced a decline.

The current price of M10 P-type cells stands at 0.48 yuan per watt, which is approaching the production cost of leading integrated manufacturers. The reduction in cell production is the current scenario.

However, the shipment pressures haven’t been alleviated, and the price gap between N-type and P-type cells has narrowed, putting both types at risk of operating at a loss due to costs exceeding their prices. On the demand side, the domestic peak season for centralized cell procurement has concluded, and there has been no significant uptick in demand in overseas markets or the distributed PV sector.

As a result, the demand for cells has weakened. With module prices also under pressure, module manufacturers are inclined to push down cell prices. Although there has been some improvement in the rate of decline for cells this week, the accumulation of cell inventory, falling upstream material prices, and sluggish downstream demand continue to exert constant pressure on cell prices.

• Module

Module prices have gone down slightly throughout the week. The mainstream concluded price for 182mm facial mono PERC module is RMB 1.08/W, 210mm facial mono PERC module is priced at RMB 1.11/W, 182mm bifacial glass PERC module at RMB 1.09/W, and 210mm bifacial glass PERC module at RMB 1.12/W.

On the supply side, module prices are persistently decreasing and have come close to the cost price of integrated manufacturers. Specialized module manufacturers, in response to module prices falling below their cost, have had to reduce their production rates to avoid losses. This is evident from the reduced demand for various auxiliary materials associated with module production.

On the demand side, the primary driver of demand continues to be large domestic projects, whereas overseas demand has not shown any significant increase. The overseas market is still working through its high inventory. In domestic bidding projects, there’s a noticeable shift toward an increased proportion of N-type modules, indicating a faster transition in demand toward N-type technologies.

In the third round of centralized procurement for PV modules by Huadian Group, the quoted price stands at 0.9933 yuan per watt. In the same month, the bidding price for modules in the centralized procurement tender by CHN Energy is 0.945 yuan per watt, marking a record low within a single month.

This price trend underscores the inevitable intense competition within the module sector, as excess production capacity is evident throughout the entire industry chain. This week, module prices have continued their descent. In summary, it’s probable that module prices will remain volatile in the future, especially considering that bidding prices for modules are swiftly approaching the 1 yuan mark.

Read more

• PV Industry Supply Chain Price Update

…

Polysilicon:

Polysilicon prices have remained stable throughout the week. The mainstream concluded price for mono recharge polysilicon is RMB 83/KG, while mono dense polysilicon is priced at RMB 81/KG and N-type polysilicon is currently priced at RMB 93/KG.

On the supply side, some of the production capacity that was impacted by the accident has been restored, and the growth rate of new capacity has accelerated. As a result, this month’s actual output has seen a significant increase, marking the first time the growth rate has hit double digits. This has led to a substantial shift in the supply and demand dynamics of polysilicon.

On the demand side, specialized crystal pulling manufacturers have reduced their activation rates, exerting pressure on upstream polysilicon manufacturers. These crystal pulling manufacturers are currently focusing on depleting their accumulated polysilicon inventory.

Consequently, the forecast of a decline in polysilicon prices in the upstream segment is on the verge of becoming a reality, and crystal pulling manufacturers, in general, are delaying their procurement demands. Furthermore, the marginal increase in polysilicon is expected by the end of this month, while crystal pulling manufacturers still have sufficient inventory to consume throughout the month.

Meanwhile, the market prices of downstream cells and modules continue to remain below their production costs, and the negative signs of declining polysilicon prices are increasingly apparent. This week, the turnover of polysilicon has been slow, with prices holding steady. However, certain events, such as some second-tier polysilicon enterprises reducing their prices for N-type polysilicon, indicate that a downward trend in polysilicon prices is looming.

Wafer:

The prices of wafer have still reduced throughout the week. The mainstream concluded price for M10 wafer is RMB 2.78/Pc, while G12 wafer is priced at RMB 3.80/Pc.
On the supply side, currently, the inventory of wafer enterprises stands in the range of 2.4-2.6 billion pieces. Their production schedules and inventory for this month significantly surpass downstream demand. Consequently, wafer manufacturers face immense pressure to deplete their inventory. Specialized wafer manufacturers are clearly indicating their intention to reduce production, with some of them having already commenced this step to manage their inventory.

On the demand side, there hasn’t been a notable increase in cell procurement demand. Nevertheless, owing to diminishing profits and mounting inventory pressure, some professional cell manufacturers are contemplating reducing their production. This week, wafer prices have uniformly dropped, maintaining a price gap of approximately 0.1 yuan per watt between leading and smaller manufacturers. With dwindling downstream purchasing demand and limited cost support from the upstream segment, it’s anticipated that wafer prices will persistently decline, making it challenging to arrest this downward trend.

Cell:

Cell prices have still declined slightly this week. The mainstream concluded price for M10 cell is RMB 0.60/W, while G12 cell is priced at RMB 0.66/W. The price of M10 mono TOPCon cell is RMB 0.65/W.

On the supply side, cell manufacturers did not plan to reduce their production before the long weekend, leading to an increase in overall inventory. Currently, cell market prices are hovering close to production costs. Some specialized cell manufacturers are now contemplating reducing production and focusing on depleting their existing inventory.

On the demand side, the operational rates of specialized module manufacturers have not improved, and cell prices have not reached their lowest point. Downstream consumers have adopted a bearish stance, and their purchasing strategies involve buying products with increasing prices rather than those with declining prices. Consequently, they are postponing their purchasing demands. Assessing specific cell models, the inventory of P-type modules in the downstream segment is high, and the demand for domestic centralized projects remains stagnant. As a result, there is insufficient momentum for module manufacturers to improve their production scheduling, and the demand for P-type cells is weak.

When it comes to N-type cells, there is a substantial difference in demand between high-efficiency and low-efficiency cells. The supply of low to medium efficiency cells has increased significantly, but the market’s receptiveness to them is low. Consequently, their inventory is growing, whereas the demand for high-efficiency N-type cells remains positive. However, in the latter half of the year, most orders are for P-type cells, which creates increased shipment pressure even for high-efficiency N-type cells.

This week, cell prices have been erratic, but overall, they are declining. There is currently no support from the cost side, and with weak customer demand, there is still room for further reductions in cell prices.

Modules:

Module prices have declined slightly throughout the week. The mainstream concluded price for 182mm facial mono PERC module is RMB 1.20/W, 210mm facial mono PERC module is priced at RMB 1.21/W, 182mm bifacial glass PERC module at RMB 1.21/W, and 210mm bifacial glass PERC module at RMB 1.22/W.

On the supply side, the shipment volumes of module manufacturers have exhibited significant divergence. The market price for modules has dropped even below the production costs for specialized module manufacturers, prompting them to drastically reduce their production. Despite weak current demand, top-tier leading manufacturers are maintaining high operational rates and are even undercutting prices to secure more orders, squeezing the market share of smaller manufacturers.

On the demand side, overseas inventory levels are elevated, and as module prices continue to decrease, customers are closely monitoring market dynamics. Furthermore, there are rumors that the European Union may impose trade barriers to support local photovoltaic manufacturers. This has instilled panic among module manufacturers, who are likely to reduce module prices to clear their inventory.

Stimulated by the commencement of ground projects, domestic demand for modules has improved. However, industry chain prices are still on a downward trajectory, and domestic customers are increasingly concerned about further price declines. Given that current module inventory can still meet short-term delivery demands, the demand for modules from domestic manufacturers is not expected to surge in the short run. This week, module prices declined, with G12 P-type modules dropping by 1.63% and M10 P-type cells falling by 0.83%. However, the downward trend persists, and there is still room for further price declines.